Keri-systems RPB-200 User Manual download pdf

RPB–200: RF Receiver

1530 Old Oakland Road, Suite 100 01825-200 Rev. B

San Jose, CA 95112 USA

(800) 260-5265 (408) 451-2520 FAX (408) 441-0309

Web: http://www.kerisys.com E-mail: [email protected] Page 1 of 8

RPB–200

Quick Start Guide

The RPB-200 RF Receiver

The RPB-200 can be used with the PXL-250W or the PXL-100 with an OB-7. It provides a range of up to 50 feet when

used in conjunction with a standard hard wire antenna and either mini or standard transmitter cards. There are no

switches or jumpers to set; simply install the enclosure, make the wiring connections, and the unit is ready for use.

NOTE: This document provides the instructions for connecting the RPB-200 to the PXL-250W Tiger Controller or the

PXL-100 Smart Controller. Please refer to the installation instructions provided by the RPB-200's manufacturer for

instructions on enclosure mounting and for providing power to the RPB-200.

1.0 Dimensions

1.1 Enclosure

• 5.00 inches High x 5.00 inches Wide x 2.00 inches Deep

• 12.7 cm High x 12.7 cm Wide x 5.1 cm Deep

1.2 Antenna

• 11 inches High

•28 cm High

Figure 1: RPB–200 RF Receiver

1 2 3 4 5 6 7 8