Keri-systems Doors.NET Manual User Manual download pdf (Page 459)

100

101

Doors.NET Reference Manual

- 459 -

Precedence option in the pull-down menu.

NOTE: Precedence only applies if hardware inputs are being used to initiate Global

Lock or Global Unlock actions. If hardware inputs are not being used, the Situation Man-

ager icons on the ribbon bar directly handle switching between Global Lock, Global

Unlock, and Normal states.

Hardware Control

Specifies whether the software is in control (via the Situation Manager icons) or hard-

ware inputs are controlling the changes to the Global Lock/Unlock and Normal states.

The default is hardware has precedence.

l If Software has Precedence, then the Situation Manager icons on the ribbon bar

display status and directly control switching between Global Lock, Global Unlock,

and Normal states. A physical input is not required in this mode but not excluded

either; you can use both.

l If Hardware has Precedence, then the Situation Manager icons on the ribbon bar

display status only and nothing happens when an operator clicks on the icons.

1. To set the Hardware Control precedence, click in the Hardware Control field in the

grid and select the desired Hardware Has Precedence or the Software Has Pre-

cedence option in the pull-down menu.

Global Reset Type

Specifies how the system will reset a hardware initiated Global Lock/Unlock and return

to the Normal state. There are two types of hardware states: Latched or Momentary.

l Latched means the state of the Lock/Unlock command follows the state of the input

– ON = enabled, OFF = disabled (typically a single throw-switch)

l Momentary means the Lock/Unlock command is enabled when the input is tripped

(typically a push-button, momentary switch)

The default is Latched.

l If Latched, then internal logic is used to determine when to return the mode back to

Normal.

If multiple hardware inputs are used for Global Lock and/or Global Unlock,

the system will reset to Normal only after every input has returned to normal.

In the case where there are multiple inputs for Global Lock and Global

Unlock with at least one input for each has been triggered, internal logic is

used to take the system to the correct state based on the Global Lock/Unlock

Precedence property.

1 2 ... 454 455 456 457 458 459 460 461 462 463 464 ... 601 602

Comments to this Manuals

No comments

Keri-systems Doors.NET Manual User Manual Page 459

Comments to this Manuals

Related products and manuals for Software Keri-systems Doors.NET Manual